Typical response within one business day · Machine recommendation from our engineers
An in-line flow scale that weighs grain continuously as it passes, for rice mills, grain elevators and ports. Five models handle up to 20,000–100,000 kg/h of paddy (about 22–110 US tons per hour). It is motor-driven, so no compressed air is needed.
20–100 t/hpaddy, 5 models
X(0.5)accuracy class
No airmotor-driven
RS232/485data output and printing
Capacities are for paddy at standard moisture. Throughput depends on material density and grain size.
The number in the model name is not the flow rate. If you need more flow than one scale handles, send us the required flow and we will tell you what we can supply.
Is the DCS-LD series the right fit?
Good fit
Rice mills tracking milling yield between stages
Intake points checking supplier weights
Grain elevators and port terminals
Plants that need batch totals for inventory and process control
Free-flowing corn, soybeans, wheat, seeds and plastic pellets
You need to blend materials at a set ratio: see the DCS-SZ series
Where it goes in a rice mill
Raw intake Check supplier invoices and record incoming paddy.
Cleaning Weigh before and after cleaning to work out impurity percentage.
Hulling Track brown rice output and spot throughput drops from wear.
Milling and polishing Compare polished rice with brown rice input to calculate yield.
Sorting and storage Record rice sent to storage or packing and avoid over-shipment.
We recommend at least three flow scales: after intake, after cleaning or hulling, and after milling before packing.
The weigh hopper sits on three load cells in a sealed chamber. In automatic mode the scale weighs continuously and totals each batch; manual mode jogs the mechanism for cleaning.
Watch it run
Technical specifications
Item
Metric
US units
DCS-50LD
≤20,000 kg/h paddy; 10 g division; 0.9 kW; 1,031 × 1,130 × 1,769 mm
